Powder Coating Application Equipment
Manual Spray Gun Systems
- Proportional powder control, available as an optional extra, controls powder output in relation to distance of gun from object ensuring smooth powder laydown even with high powder build.
- Gives improved safety, efficiency of charging, minimum surface disruption and unrivalled recoatability.
Table Technical Data
- Adjusts the voltage up to 85 kV and the current to a maximum of 50 MicroAmps
- Is recommended for most applications, as well as for most available powders on the market
- Provides an excellent electrostatic efficiency
- Gets you a beautiful finish, even when applying thick coats
- Allows perfect re-coating
Table Electrical Data
- Input Voltage: 100-260 V, 50-60Hz, single phase
- Consumption (max) (45 VA)
- Input Current: 400 mA at 115 V, 200 mA at 230 V
- HV Output: 10 to 85 kV, negative
- Current Output: 0 to 50 MicroAmp
Table Pneumatic Data
- Powder throughput (max): 24 kg/h
- Air pressure supply: 7 bar/105 PSI
- Air specifications: de-oiled to 0.1 ppm; dehydrated to 1.3 g/Nm3
- Consumption: 15 m3/h
- Manual gun: 1/4 BSPMP
Table Weight and Dimensions
- Weight (packed package): 40 kg/89 lbs
- Dimensions (packed package): 72cm x 51 cm x 106 cm (28" x 20" x 42")
- Volume (packed package): 0.389 m3 (102 gal)
- Gun weight, without cables and hoses: 495 gr (1.1 lb)
Hopper Technical Data
- Adjusts the current to a maximum of 100 MicroAmps
- Is proposed for the spraying of difficult powders, particularly metallics
- Is used for penetration into hollow recesses
- Also generates exceptional wrap
- The current and voltage indicators are easy-to-read bar-graphs displayed on the front face of the controller
- The values are legible at a glance
- MG400 provides a dual-gun/controller version for double gun operations
Hopper Electrical Data
- Input Voltage: 100-260 V, 50-60Hz, single phase
- Consumption (max) (45 VA)
- Input Current: 400 mA at 115 V, 200 mA at 230 V
- HV Output: 10 to 85 kV, negative
- Current Output: 0 to 100 MicroAmp
Hopper Pneumatic Data
- Powder throughput (max): 24 kg/h
- Air pressure supply: 7 bar/105 PSI
- Air specifications: de-oiled to 0.1 ppm; dehydrated to 1.3 g/Nm3
- Consumption: 10 m3/h
- Manual gun: 1/4 BSPMP
Hopper Weight and Dimensions
- Weight (packed package): 42.5 kg/94 lbs
- Dimensions (packed package): 72cm x 51 cm x 106 cm (28" x 20" x 42")
- Volume (packed package): 0.389 m3 (102 gal)
- Gun weight, without cables and hoses: 495 gr (1.1 lb)
Items shown in photographs and listed on this website are indicative of items supplied by Powder-X Coating Systems, LLC. Powder-X Coating Systems reserves the right for continuous improvement and may alter specifications, components, or subcontracting agents without prior notice.
